Monitor Question

andy

I'm trying to get a new 30quot; monitor and I don't know if to pick the Dell (3007WFP-HC) or the HP (LP3065).  Any suggestions?

I think they're about the same spec wise but I'll always take a Dell any day since I believe they make great monitors... That and I despise HP anyways.


Originally Posted by thecallahanI think they're about the same spec wise but I'll always take a Dell any day since I believe they make great monitors... That and I despise HP anyways.haha.

Here are the Specs:

HP LP3065

Display type
Active matrix TFT
Display size
30 in (75.6 cm)
Viewable area
29.7 in (75.6 cm)
Native resolution
2560 x 1600 @ 60 Hz
Pixel pitch
0.25 mm
Signal input
Three dual-link DVI-D inputs with HDCP over digital DVI2
Viewing angle (horizontal)
178 degrees
Viewing angle (vertical)
178 degrees
Cabinet Colors
Carbonite

Image quality

Brightness (typical)
Up to 300 nits
Contrast ratio (typical)
Up to 1000:1
Pixel pitch
0.25 mm
Frequency range (horizontal)
100 kHz
Frequency range (vertical)
60 Hz

Dimensions (w x d x h)
27.2 x 9.5 x 23.2 in (69.2 x 24 x 59 cm)
Weight
30.6 lb (13.9 kg)3007WFP-HC
Pixel Pitch
0.2505mm
Response Time (Typical)
12ms
Preset Display Area

Horizontal - 641.28mm (25.25 inches)

Vertical - 400.80mm (15.78 inches)
Viewing Angle

178 degrees (vertical), 178 degrees (horizontal)
Luminance (Brightness)
300cd/m2 Typical
Contrast Ratio

(1000:1)
Horizontal Scan Frequency kHz
49.31 kHz to 98.71 kHz (automatic)
Vertical Scan Frequency Frequency kHz
60 Hz (automatic)
Optimal Resolution
2560 x 1600 at 60 Hz
Preset Display Modes
VESA, 1280 x 800 - 50 kHz Horizontal, 60.0 Hz Vertical
VESA, 2560 x 1600 (digital) - 99 kHz Horizontal, 60 Hz Vertical
Connector Type
DVI-D (dual link) with HDCP, white connector Stand

Tilt
VESA Mounting Support

Yes (100mm) Dimensions (Height x Width x Depth)
449.55mm x 559.7mm x 200mm (17.7” x 22” x 7.87”) Weight (Monitor Only)
11.38 Kg (25.017 Ibs.) Weight (with packaging)
16 Kg (35.24 Ib)